Repair Swintec Typewriters
Swintec Corporation first started manufacturing typewriters in 1978. Beginning in 1986 Swintec directed their marketing toward government agencies, including the General Services Administration (GSA) and the Bureau of Prisons (BOP) though their typewriters remained available on the retail market. Swintec typewriters can still be purchased by the general populace as their sturdy, simple machines fit many situations.
Instructions
Repair of a Swintec Typewriter
1. Test the typewriter by adding a sheet of paper and typing each key -- both upper- and lowercase. Figure out what the problem is: is the carriage return irregular and/or incomplete; are any of the keys sticking; is the imprint too light; are the controls not working properly? Check out the area where the typewriter is located to determine if the typewriter has enough clearance for all moving parts and whether the typewriter is level.
2. Review the manual for troubleshooting tips and/or review Internet sites for repair tips for your specific issue. Order any replacement parts from Swintec or an authorized dealer.
3. Remove the typewriter key cover and then the carriage roller. Remember to always store all removed parts in the exact order of their removal. Whatever the issue is with the typewriter, maintenance of all moving parts, including cleaning and lubricating, is important. Wipe clean with a slightly moistened rag all the interior parts. Scrub the same parts you wiped with the toothbrush and then wipe once again with the rag. Let the typewriter air dry for at least 30 minutes.
4. Lubricate all typewriter moving parts with the typewriter lubricant. Replace all parts you have removed and then test the machine by typing each key both lower- and uppercase again. If you find that any of the keys are still sticking or problems remain with the roller, disassemble the typewriter again and focus on those malfunctioning parts.
5. Assemble the machine again and test.
